Keith Outten
08-29-2012, 5:30 AM
In our Turners Forum there is a thread that I felt might be of interest to Laser Engravers and possibly CNC owners.
All you need is a profile picture that you can trace in Corel Draw to create a vector line that you can laser cut.
Its a unique way to present profile pictures and could easily be vector cut from acrylic or wood. I envision a tall rectangular lamp base with a light source in front of the template which would cast the shadow on the wall.
http://www.turnyourhead.com/pirolette.php
Thanks to Bill Huber for sharing this technique that he found.
.
All you need is a profile picture that you can trace in Corel Draw to create a vector line that you can laser cut.
Its a unique way to present profile pictures and could easily be vector cut from acrylic or wood. I envision a tall rectangular lamp base with a light source in front of the template which would cast the shadow on the wall.
http://www.turnyourhead.com/pirolette.php
Thanks to Bill Huber for sharing this technique that he found.
.