Stupid question about extension cords

[Rich Engelhardt]

I have a three outlet 12 ga pigtail.

Can I use that at the end of a 14 ga. extension cord?

I'd only be running one tool at a time & the tools would be 10 amp or less, things like a corded drill or a jig saw.

[Jerry Miner]

Can I use that at the end of a 14 ga. extension cord?

Yes. No problem. You can always go heavier (lower gauge no. = heavier wire)---going lighter can cause problems.

You don't say how long your cord is, but remember that shorter is better--- voltage drops as length increases. Voltage drop can lead to motor over-heating.

[Jim Finn]

Yes you can use it. In my experiance those three way wyes do not last long.

[Leo Graywacz]

Yes you can use it. The smaller ga cord will limit the amps you will be able to pull.