View Full Version : Older Craftsman RAS guard fit a DeWalt GWI?
Roy Turbett
08-21-2012, 9:23 PM
I'm looking for a guard for my DeWalt GWI and haven't had any luck so far. Does anyone know if a guard from an older 10" Craftsman RAS will fit a DeWalt GWI? It looks like both guards were designed for motors with studs.
Rick Potter
08-22-2012, 5:09 AM
If you have no luck, I remember one with a home made blade guard way back. It had been on the saw for years.
Rick Potter
Harvey Miller
08-22-2012, 7:19 AM
You might try asking on the Old WoodWorking Machinery forum:
http://www.owwm.org/viewforum.php?f=1
Lots of good advice on older equipment there.
Myk Rian
08-22-2012, 7:32 AM
My instinct says no.
phil harold
08-22-2012, 8:04 AM
ras forum may help you for parts and whatnot
forums DOT delphiforums Dot com/woodbutcher/start
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.