Red hairline not being recognized

[Debbie Sweet]

Hello

My computer is back after a 3day repair and shutting me down. Now that I'm back up - they screwed me up by setting the computer back to factory. Somehow the red isn't being recognized -- just black is working. Where do I find how to turn the setting "on" so either Corel or my laser sees the red and cuts. I have a Pinnacle Mercury 25W - so I don't know what window to go into -- the Corel or Mercury?? And what to look for?

Thank you for any help!!

Debbie Sweet

[Mark Sipes]

my laser requires that the color be set to RGB and that red be set at 255 0 0 and line thickness be set to hairline or .0005 or less

[Jim Reinhard]

open something then click print .Under print you will see the color tab .On the color tab it says color conversion prformed by: choose corel draw. Also in the laser print driver choose manual color fill.Also follow what mark said about RGB.

[Rodne Gold]

In Corel , turn OFF all colour management.