PDA

View Full Version : Lift Lid Boxes for Photographs



glenn bradley
07-25-2012, 7:22 PM
For Mother's Day 2011, I made Mom a couple of boxes to hold the pics that were overflowing a shoebox in her office. She filled them both up pretty quick so I have a perfect excuse to make her a couple more for her birthday 2012. No awards for "golden" dimensions here; just a form follows function shape to hold her photos. I made off with one of the boxes from last year to be sure I got the dimensions right. It is surprising how dark the cherry has gotten in just a year or so.

I had some of the original cherry left from last year. Once milled it showed the usual light cherry color. On small projects I usually use hand tools more than not but, used the tablesaw and sled to cut the fingers as has become my method.

237673237674237675

I rough fit them, clamp them and route for the tops and bottom using a slot bit and the router table.

237676237677

Here is one dry fit straight off the machines. Tops and bottoms are floating. The handwork ahead will make the two of them look more like their cousin shown in the background. Finish will be the same as the originals; clear shellac and paste wax.

237672

Jack Camillo
07-25-2012, 7:53 PM
Very nice! Thanks for sharing

Van Huskey
07-26-2012, 7:15 AM
Very cool!

Mark Valsi
07-26-2012, 10:38 AM
Nice job on the DTails. I don't like the ones that are evenly spaced, these logo great !

David Nelson1
07-28-2012, 7:57 AM
very nice I really like the finger joints and the matched grain!

glenn bradley
08-05-2012, 3:04 PM
Here is one of the original boxes and one of the new pair. Same material, same finish. Cherry really does tell the passage of time.

238478 . 238479

George Gyulatyan
08-06-2012, 10:21 PM
Those are lovely boxes.