PDA

View Full Version : Another block off the old Cottonwood



Doug Herzberg
07-17-2012, 2:43 PM
It's gardening season and SWMBO says I have to finish at least some of those projects I started over the past ten years. It seems I will only have a few days in the shop this summer.

This is another from the cottonwood we had to cut down in Denver. It's my first experiment with WTF. To me it looks like it has dust in it when it dries. I try to be careful, but maybe it really does. I made the mistake of machine buffing and it melted like lacquer. Had to redo the entire finish. No cracks yet, but it looks like it may someday. 9" x 3" x 3/16". C&C appreciated.

237072237073237074

Roger Chandler
07-17-2012, 4:37 PM
gorgeous bowl Doug........it may be the grain of cottonwood that raised because WTF is water based. I have gotten very smooth results with WTF, except for that elm box I did in the demo..........it is like I did not sand it except to about 150 grit, but I sanded it to 400 grit. For some reason it must have raised the grain and pores of the wood.........:confused:

Bob Bergstrom
07-17-2012, 5:37 PM
Very nice color and figure. Also like the shape and workmanship. That for sharing

Jim Burr
07-17-2012, 5:54 PM
That bowl has more figure than a belly dancer Doug! High 5 for keeping it simple and clean!

steven carter
07-17-2012, 9:47 PM
Really nice bowl, very smooth. Cottonwod can be very pretty as this one demonstrates!

Michelle Rich
07-18-2012, 6:15 AM
gorgeous wood . I'll keep my fingers crossed it does not crack..(I'm sure that will help :-) )

Steve Schlumpf
07-18-2012, 7:39 AM
Sure is some pretty wood! Hope the finish holds up!