View Full Version : What adhesive?
curtis rosche
07-11-2012, 6:45 PM
Im working on an urn out of cherry. Im using a peice of 6inch PVC for the thread so the top screws on. What adhesive should be used to bond the PVC to the cherry?
Bernie Weishapl
07-11-2012, 7:42 PM
I did one for my BIL about 2 months ago. I roughed up the inside of one and the outside of the other piece of PVC with sandpaper where the glue will go. I used epoxy and let it setup for 24 hrs before I tried it. Worked great. I used 3" threaded pieces.
Greg Just
07-11-2012, 8:00 PM
Like Bernie, I would use 2-part epoxy.
curtis rosche
07-11-2012, 8:06 PM
any particular brand? Will the bond be strong enough to finish turn the lid once it is screwed on?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.