Need Molding Help

[Bill Gerhardt]

http://i3.photobucket.com/albums/y80/travelinbill/Crown/P1010002.jpgI'm trying to finish off a Library unit made of Lyptus and I am looking for some help in balancing the crown molding
can you help here is pictures of what it looks like from 3 different perspectives to give you an idea of what the final product will look like.
All molding must be made from the stock I have so I don't end up with an imbalance in the material
http://i3.photobucket.com/albums/y80/travelinbill/Crown/P1010003.jpghttp://i3.photobucket.com/albums/y80/travelinbill/Crown/P1010004.jpg

[Hal Flynt]

I like Simple combinations of cove and bead, giving it a traditional look. They can be used individualy and/or in combination with each other. (I tried to scan a scetch, but I didn't do something right.)

I cut cove on the edge of wider stock and bandsaw to final width, same with beads and combinations.

[Richard Wolf]

Thats a great looking piece. I hope it fits out of the basement.
It looks like you started some moldings. I think if you start with some large cove on the table saw and added on from there it will look great. But maybe thats what you have there already.

Richard

[Dan Oelke]

Looks gorgeous! Of the 3 top moldings I like the one on the right the most, but that is a personal preference and I think any of them would work just fine.

Can't wait to see finished/installed pictures!