Raymond Fries
06-17-2012, 9:26 PM
Well, I am down to getting the fence adjusted on my xacta saw and I will be making dust. YAY
The saw has the xacta fence and the nylon adjustmnet screws seem to be frozen. Seems like it takes a 6mm allen wrench. The wrench just expands the nylon and rotates in the screw abd the screws will not budge. I tried WD-40.
Any suggestions besides drilling them out and buying new?
Thanks
The saw has the xacta fence and the nylon adjustmnet screws seem to be frozen. Seems like it takes a 6mm allen wrench. The wrench just expands the nylon and rotates in the screw abd the screws will not budge. I tried WD-40.
Any suggestions besides drilling them out and buying new?
Thanks