Delaminating two glued up boards?

[John Hollander]

I recently laminated a 1/4 piece of blood wood to some 3/4 zebra wood with some titebond 3. The lamination didn't go as well as I had hoped and I'm not pleased with the end result. Is there anyway to delaminate these two boards without completely ruining them? The only option that I have been able to come up with is to plain the bloodwood off, but Id like to save the bloodwood if possible. I also have a bandsaw, but it wouldn't be able to "resaw" the boards apart.

[scott vroom]

If you have a power planer and the stock will fit, I'd use it to mill down the blood wood. The glue is hard on knives but I don't think doing it once will have an appreciable effect. The remaining 3/4" zebra wood will be a bit thinner.