Amos De Pasquale
05-23-2012, 9:13 AM
Hello fellow engravers, I have a Laser Engraver that uses MPC03 Controller, I want to upgrade to an MPC6515 controller, I already have the kit to do so, BUT--it is not a straight changeover-which I believed it would be!!,
I have the details and pin outs etc of the MPC6515 ok, However, I do need the pin outs or circuit of the MPC03,:confused: that way I can lable the wires for a change over, is there anyone here willing and able to help with diagrams/circuits? Is there anyone who has actually done such an upgrade?
OR, does anyone know whom I could use here in Melbourne to do the work? Sure would appreciate some positive help, Thanks Amos:)
I have the details and pin outs etc of the MPC6515 ok, However, I do need the pin outs or circuit of the MPC03,:confused: that way I can lable the wires for a change over, is there anyone here willing and able to help with diagrams/circuits? Is there anyone who has actually done such an upgrade?
OR, does anyone know whom I could use here in Melbourne to do the work? Sure would appreciate some positive help, Thanks Amos:)