PDA

View Full Version : Big Walnut Bowl



John Beaver
05-21-2012, 7:36 PM
This turned out to be about 5" x 17"

Bleached and Carved Rim

C&C welcome

Roger Chandler
05-21-2012, 7:41 PM
Very innovative John........of course you are known for your innovation, so no surprise here............great idea on that rim treatment.........whodathunkit?

Eric Holmquist
05-21-2012, 7:41 PM
Nice form and a great rim! I never thought that Walnut could bleach that light.

John Keeton
05-21-2012, 8:06 PM
A refreshing item for you, John! Nice work - very simple, yet stylish.

Steve Vaughan
05-21-2012, 8:24 PM
I like that! Really nice!

Bernie Weishapl
05-21-2012, 8:43 PM
I like it John and the rim treatment is really nice.

David DeCristoforo
05-21-2012, 10:03 PM
What? No wave? Oh well... This is excellent. Great form taken to another level by the unique rim treatment.

Baxter Smith
05-21-2012, 10:27 PM
Both the bleach or the simple carving would add a touch of interest John. Another possiblity to remember! Thanks for posting!

Prashun Patel
05-21-2012, 10:49 PM
Thanks. Love it.

Kathy Marshall
05-21-2012, 11:29 PM
Very nice! I love the contrast of the bleached rim against the dark walnut and the dark lines just tie the two together.

Steve Schlumpf
05-22-2012, 12:02 AM
That's really cool John! I like the contrast created by the bleaching!

Rick Markham
05-22-2012, 2:34 AM
Super nice piece John! I agree the bleached/carved rim is a nice touch.

Thomas Bennett
05-22-2012, 8:51 AM
John, you nailed it again. I love the contrast created with the bleached rim and, of course, the scale. Well done! TB

Jon Nuckles
05-22-2012, 10:36 AM
Very nice. Your creativity is admirable.

jared herbert
05-22-2012, 5:02 PM
So tell me how did you bleach the edge like that? I guess I am asking how you contained the bleach on a small area like that. Thanks in advance Jared

John Beaver
05-22-2012, 7:54 PM
So tell me how did you bleach the edge like that? I guess I am asking how you contained the bleach on a small area like that. Thanks in advance Jared



I guess the answer is very carefully. I paint the bleach on with a small paint brush and just try to let it bleed right up to the edge. It takes about 3 or 4 passes to get the Walnut light. You have to do light coats so it doesn't penetrate too deep. I then use a very diluted white wash and wipe it on and off quickly, just to get some white into the deep pores. Lastly I sand back the edges to clean up any bleed.

The lines are just carved right through the bleach layer to expose the Walnut underneath.

Jim Burr
05-22-2012, 8:06 PM
That all works John...I like the creativity and simplicity!

Alan Trout
05-22-2012, 11:10 PM
John,

That bowl has wonderful form and it is a big bowl. Very nice.

Alan

Ed Morgano
05-22-2012, 11:26 PM
John,
That is a really nice bowl with a great rim treatment. Thanks for sharing.