PDA

View Full Version : Computer printer problem



dennis thompson
05-21-2012, 6:29 PM
I have an HP 6210 all in one printer. It has stopped printing anything I send it from my computer & tells me there is no connection to my computer. However when I tell it to print ,it goes thru the motions, i.e. it sounds like it's printing but it spits out a blank page. The ink is OK as I can make copies & when I send a fax it prints out a sent OK report. Any idea what might be wrong?
Thanks
Dennis

Chuck Wintle
05-21-2012, 7:47 PM
try this....

press # and 3 at the same time while plugging the power cord back in

Myk Rian
05-21-2012, 8:38 PM
Or unplug it, let it sit a few, try again.

Rich Engelhardt
05-22-2012, 4:05 AM
Do you have another PC you can hook up to the printer and try sending a test print to it?
That would help finding out if the problem is on the PC (drivers, etc) side or the printer side (bad interface/bad printer or USB cable).

Curt Harms
05-22-2012, 8:15 AM
If the above don't help maybe uninstall all the HP software, run a registry cleaner and reinstall?