Tony Falotico
04-01-2005, 4:32 PM
I put a coat of MINWAX Wood-Sheen, Rubbing Oil Stain & Finish on my workbench base today, and I'm not happy with the color, specifically lack of color I got. I was shooting for a deeper darker color than I got, less yellow, more brown. I know if I had used straight stain (which I probably should have) I could go over it with a second coat of different color and would be OKAY. Question is, can I do the same when using a rub on color & finish, that is use the same brand but a different color? :confused: I'm thinking the second coat will not penetrate (absorb) like the first coat. If I use a darker shade, will it penetrate evenly or end up streaking over the first coat?
The directions specify a second coat two hours later.
The directions specify a second coat two hours later.