PDA

View Full Version : Need specs for Epilog Laser



Craig Matheny
05-16-2012, 8:05 PM
I need the "n-rush current" for a 45 watt Epilog laser. I need to put a line filter/conditioner on the laser.

Bruce Volden
05-16-2012, 8:32 PM
Craig,

I use a 1250 Line-R from APC on my 35W TT. This is a line conditioner/regulator NOT a UPS. Have been running it for years with no problems--was on one of my LMI's prior to the Epilog. Me thinks you'll be just fine with something like this. Also when talking about IN-RUSH, think startup pull down like when lights dim when turning on something "large" (AC unit, table saw...). This is not usually a factor with a laser IF you are on a dedicated circuit. HTH

PS---I went this way because of me being on a rural electric system--they used to be a terrible supplier but have come a LOOONG way since I was a kid.

Bruce

Craig Matheny
05-17-2012, 12:35 PM
I am looking at the line-r 1200 but it does not help with noise I am in an amusement park old power running all IGL lines but what the protection.

Thanks