View Full Version : shadow box Q
Christopher Kanda
05-12-2012, 5:36 PM
I'm making a simple 2' x 4' x 3" deep. Do you think 1/2 thickness for the sides is too thin?
glenn bradley
05-12-2012, 6:09 PM
If it is ply and not supporting any stress, I would say you're fine. If it will be solid wood, a 48" unsupported span is pretty long. The joinery used along the edges to a back panel can solve a lot of this but, adds weight. Do you have a doodle of your design?
Christopher Kanda
05-12-2012, 6:18 PM
I don't have a sketch, and I didn't think that the weight as being an issue. I was planning on having the frame solid cherry and a back of 1/4" ply that would be screwed into the back after a fabric cover is added to it. I thought i would just make a rabbit for it to fit into.
Belton Garvin
05-16-2012, 5:24 PM
Christopher,
I don't really think there is a "simple" shadowbox. I make quite a few shadowboxes and 1/2" for 48" will be quite a span. The back will help strengthen it as long as you don't want to hang it. With only 1/2" thickness to work with it will be difficult to rabbit, I use a 3/8 rabbit to leave room for the screws holding on the back. That leaves you only 1/8" around the edge. I also make mine 3 1/4 in deep. 3" will work but you need to make your flag enclosure a little bigger to accommodate the folded flag behind. Let me know if you have anymore questions and I'll be happy to offer my suggestions on what has worked for me.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.