Rich Riddle
04-18-2012, 8:56 AM
I am rebuilding a metal band saw that has two belts. I measured them with a string and came up with the following dimensions:
Short Belt 1/2" x 30.25" long measured on the inside of the belt.
Short Belt 1/2" x 32.75" long measured on the outside of the belt.
Long Belt 1/2" x 48.25" long measured on the inside of the belt.
Long Belt 1/2" x 51" long measured on the outside of the belt.
Which belt length does one use, the inside or outside?
Does anyone know where to purchase Gates Green Stripe belts?
Any other information you have is appreciated.
Short Belt 1/2" x 30.25" long measured on the inside of the belt.
Short Belt 1/2" x 32.75" long measured on the outside of the belt.
Long Belt 1/2" x 48.25" long measured on the inside of the belt.
Long Belt 1/2" x 51" long measured on the outside of the belt.
Which belt length does one use, the inside or outside?
Does anyone know where to purchase Gates Green Stripe belts?
Any other information you have is appreciated.