Jerry Marcantel
04-08-2012, 2:15 PM
This plate was cut from the same mesquite stump that the bowl in my previous post was made from.... It is currently has no finish on it, but is ready for it when I make up my mind on what to do... It's 11/16" tall at the outer rim, 9 1/4" od, and is 1'4" thick with a 1/4" foot.. This was tougher than the bowl, because near the center was a dirt pocket(the dark spot) which would allow me about 10 seconds of cutting before I had to resharpen my gouge... I ended up mining out 90% of the dirt so I could get the "dang" thing finished......
C&C's welcomed........... Jerry (in Tucson)
228991228992
C&C's welcomed........... Jerry (in Tucson)
228991228992