Bruce Clumpner
04-03-2012, 5:25 AM
I've run into a problem with my epilog lately. It's not accepting the input to reset the home position, which as you can guess, is very frustrating. It sometimes catches and sometime not, no rhyme or reason. I'm hoping it's not something in the motherboard. Here's the symptoms...
I press X/Y Off Button + Go to release x-axis
Move head using red-dot to locate new home position, lcd panel shows position of dot changing in relation to last home position (so it's reading the position OK)
Press Set Home button to lock new position
9 times out of 10 it resets to the last home position.
Re-boot does not fix issue
Since the key-panel is accepting input I know that's good, even though it resets on input
The LCD shows the position of the head as it moves around, so I know that's good as well.
I'm running Firmware V1.0.2.7, and I don't think there is an update out, so I may reinstall the firmware or go back down a version to see if it works.
Any other suggestions?
Thanks.
I press X/Y Off Button + Go to release x-axis
Move head using red-dot to locate new home position, lcd panel shows position of dot changing in relation to last home position (so it's reading the position OK)
Press Set Home button to lock new position
9 times out of 10 it resets to the last home position.
Re-boot does not fix issue
Since the key-panel is accepting input I know that's good, even though it resets on input
The LCD shows the position of the head as it moves around, so I know that's good as well.
I'm running Firmware V1.0.2.7, and I don't think there is an update out, so I may reinstall the firmware or go back down a version to see if it works.
Any other suggestions?
Thanks.