Chris Atzinger
03-26-2012, 6:37 PM
Hi,
I am in the final design phases of a set of built-ins for a home office. The drawing is below. The "counter-top" is 132" long, so in order to avoid having a seam somewhere if I use plywood, I am considering just using 6/4 solid maple. I am concerned about cupping, though.
Do I need to use bread board ends on the counter-top and desktop? Is there a different/better way to avoid cupping?
Thanks!
Chris
https://lh3.googleusercontent.com/-eZkBuBaab1M/T2oY1HswqmI/AAAAAAAATlk/PMmwH3FCRbI/s1280/4%2520cab%2520built%2520ins%252020120321.jpg
I am in the final design phases of a set of built-ins for a home office. The drawing is below. The "counter-top" is 132" long, so in order to avoid having a seam somewhere if I use plywood, I am considering just using 6/4 solid maple. I am concerned about cupping, though.
Do I need to use bread board ends on the counter-top and desktop? Is there a different/better way to avoid cupping?
Thanks!
Chris
https://lh3.googleusercontent.com/-eZkBuBaab1M/T2oY1HswqmI/AAAAAAAATlk/PMmwH3FCRbI/s1280/4%2520cab%2520built%2520ins%252020120321.jpg