A couple of overdue gloats

[Scott Coffelt]

As posted in early march, I bought the Festool OF1400 and TDD drill. Below is a the pics of the systainers. I've not had a chance to use the router yet, but hoped to soon on the cabinets.

The drill has been used a number of times and I am totally pleased with it.

At the WWing show in KC, I also decided to upgrade the 12" blade on my Delta twin laser. So I bought the Forrest Chopmaster. I still ned to get it installed, but I know I will be pleased.

I also purchased a nice XY table from ENCO, but it will remain int he box until I move into my new shop in the fall. My current shop set up will not allow me to add it to the morticer.

[Kelly C. Hanna]

Nice gloat Scott! I'll bet that blade produces a glass-like cut!

[Mark Singer]

Scott....things are good....as they say...great stuff!

[John Renzetti]

hi Scott, Almost bought that TDD from Bob Marino last fall. The Makita is still going strong so I had to put it off.
You got some great tools there. That Chopmaster is a great blade. I've got it on my old DW 705.
take care,
John

[Mike Cutler]

Nice gloat Scott. I'm sure you'll really like that Festool Router once you get a chance to play with it. However from experience I can promise you that you'll really appreciate that XY sliding vise when it comes time. ;)