Scott Coffelt
03-24-2005, 11:21 PM
As posted in early march, I bought the Festool OF1400 and TDD drill. Below is a the pics of the systainers. I've not had a chance to use the router yet, but hoped to soon on the cabinets.
The drill has been used a number of times and I am totally pleased with it.
At the WWing show in KC, I also decided to upgrade the 12" blade on my Delta twin laser. So I bought the Forrest Chopmaster. I still ned to get it installed, but I know I will be pleased.
I also purchased a nice XY table from ENCO, but it will remain int he box until I move into my new shop in the fall. My current shop set up will not allow me to add it to the morticer.
The drill has been used a number of times and I am totally pleased with it.
At the WWing show in KC, I also decided to upgrade the 12" blade on my Delta twin laser. So I bought the Forrest Chopmaster. I still ned to get it installed, but I know I will be pleased.
I also purchased a nice XY table from ENCO, but it will remain int he box until I move into my new shop in the fall. My current shop set up will not allow me to add it to the morticer.