No 52 - Spalted Honey Locust Change Bowl

[James Combs]

Made this last week while trying to come up with another "Ant Pool" style turning. A few punky locations were stabilized with thin CA. Has some chatter tearout on the upper inside edge on two sides. Tearout was so deep I was afraid the wall would be too thin. Filled in while wet sanding with lacquer(got to be quick;)).



Stats:
Material = Spalted Honey Locust Crotch
Diameter = 6-1/2"
Height = 2"
Finish = Three Coats of RC lacquer then buffed with wax.
226745226746226747226748226749226750

C&C welcomed.

[Roland Martin]

That's a beautiful piece of wood, and a great little bowl.

[John Keeton]

JD, that is one nice looking piece of wood, and good job on the bowl, too. We HAVE to get rid of that piece of PVC stand, though! It detracts from an otherwise very nice bowl.

[Jim Burr]

That sir is a bowl! Wood is amazing:eek:!! Looks like a flat coming up from the foot, but that could be the PVC ;) Nice job JD!:D

[charlie knighton]

very nice, pretty wood

[Michelle Rich]

good golly that wood is super...pleasing little bowl

[Steve Schlumpf]

Very pretty wood! Great looking bowl!

[Bernie Weishapl]

Great looking bowl and really nice wood James.

[James Combs]

Thanks to everyone for your kind expressions except of course John and Jim.:rolleyes:


JD, that is one nice looking piece of wood, and good job on the bowl, too. We HAVE to get rid of that piece of PVC stand, though! It detracts from an otherwise very nice bowl.


That sir is a bowl! Wood is amazing:eek:!! Looks like a flat coming up from the foot, but that could be the PVC ;) Nice job JD!:D

Gee whiz, just trying to get a little "elevation".:D

How about this, better?
226857

Still using the PVC Though..:p;)
226858

[Roger Chandler]

Nice bowl JD...........really nice wood!

[Baxter Smith]

Nice bowl out of some very pretty wood JD!