Jim Tobias
03-10-2012, 10:02 AM
I am building and oval/ellipse table with an open middle for glass and am wondering if there are any special considerations that need to be given to the number of pieces of solid maple that I use to create the top. The
length is 50" and th4 width is 30". The width of the frame (outside edge to inside edge is 7"). I would prefer to use 4 pieces to glue up and then trim with router. Is movement going to be an issue with using 4 wider boards instead of 8 narrower boards?
Below is picture of set up.
Jim226632
length is 50" and th4 width is 30". The width of the frame (outside edge to inside edge is 7"). I would prefer to use 4 pieces to glue up and then trim with router. Is movement going to be an issue with using 4 wider boards instead of 8 narrower boards?
Below is picture of set up.
Jim226632