Peter Fabricius
03-08-2012, 9:58 PM
Hi All;
I worked on my Cyclone Dust Collector this past week and as you can imagine there were times when I had to wait for the glue to dry. So, I had seen and really liked the Salt and Pepper shakers posted by Brian here on SMC and I made a set.
A clean, neat and efficient design, thanks Brian.
I drilled the "S" and "P" with a 1/16 drill and all the holes are not through holes, only two in the "S".
Need to add more Tung Oil on the Ebony top, it seems to have soaked up more than the Mahogany end grain...
Mahogany bodies, Ebony and Maple bands and top inserts. The plastic plugs fit in 5/8" holes and come from Hydraulic lines used to keep the dirt out of new lines.
Great project and it did use up a little slack time in the shop instead of watching glue dry.....
C&C welcome
Peter F.
I worked on my Cyclone Dust Collector this past week and as you can imagine there were times when I had to wait for the glue to dry. So, I had seen and really liked the Salt and Pepper shakers posted by Brian here on SMC and I made a set.
A clean, neat and efficient design, thanks Brian.
I drilled the "S" and "P" with a 1/16 drill and all the holes are not through holes, only two in the "S".
Need to add more Tung Oil on the Ebony top, it seems to have soaked up more than the Mahogany end grain...
Mahogany bodies, Ebony and Maple bands and top inserts. The plastic plugs fit in 5/8" holes and come from Hydraulic lines used to keep the dirt out of new lines.
Great project and it did use up a little slack time in the shop instead of watching glue dry.....
C&C welcome
Peter F.