Rick Reinsma
03-22-2005, 8:50 PM
Thanks to all you Guy's who responded for my original call for help.I ended up calling Delta about the problem (infeed table to close to the knives) and was told that there was no adjustment to move the table back(You and I figured that out before) ,he suggested that there must have been shipping damage and after closer inspection with my flashlight, there indeed was a broken pivot block. Both of the top tabs that support the pivot bar for table adjustment were broken. Service guy is coming don't know when though.
Thanks for the Web site link for tweaking the table setting's....Rick
Thanks for the Web site link for tweaking the table setting's....Rick