Maggi Steff 2048 Powerfeeder mounting to PM2700 Shaper?

[Jeff Longley]

Hello all, I have a PM2700 Shaper Table and want to buy the Maggi Steff 2048 Powerfeeder and would like to know, are the bolt holes on the PM2700 shaper table spaced to fit A Maggi Steff 2048 without having to drill and tap new holes? The PM2700 Shaper Table already has holes on the left and right side of the table top.

Jeff

[Stephen Cherry]

Can't say for sure, but I have a maggi, delta (italian) and tiawanese feeder, all with the same mounting hole spacing.

[Jeff Longley]

Stephen, Thanks for the input! I hope to purchase the 2048 in a few days but they are on back order.

Jeff

[David Kumm]

My experience has been the same. Only the Univer has a different bolt pattern for the equivalent unit. Dave