Randy Walker
02-11-2012, 5:02 PM
Hi every one
I have a request for a cut-out that is a symmetrical puffy triangle and a square. Both must fit inside a 5 inch circle and have a 2 inch hole in the middle. It is proving to be more difficult than I had thought it would be. I would appreciate it if anyone could give me a hand or tell me what I’m doing wrong. The graphic below is what I have come up with so far but it is not symmetrical and I cant get the hole to find center. These will be used for some kind of a tool guide so they must be pretty close.
Thanks
Randy Walker
I have a request for a cut-out that is a symmetrical puffy triangle and a square. Both must fit inside a 5 inch circle and have a 2 inch hole in the middle. It is proving to be more difficult than I had thought it would be. I would appreciate it if anyone could give me a hand or tell me what I’m doing wrong. The graphic below is what I have come up with so far but it is not symmetrical and I cant get the hole to find center. These will be used for some kind of a tool guide so they must be pretty close.
Thanks
Randy Walker