View Full Version : laser engraving stainless wedding knifes with pearl thermark
Don Necaise
02-09-2012, 9:01 PM
I have had no luck getting thermark (pearl White) to stick to these wedding knife sets Any one have any ideas to help me out? thanks for the help
Mark Sipes
02-09-2012, 9:14 PM
Are you sure that the material you have is intended for Metal and not glass.....
LMC98 Bright White for Glass & Ceramic
Gary Hair
02-10-2012, 12:38 AM
I just used some pearl on a handgun, it turned out really nice. I brushed it on thicker than I apply black cermark, and lasered it as I normally do - 100% power 10% speed. I have a 30 watt, 80ips machine so you should adjust those numbers for yours.
Gary
Chris DeGerolamo
02-10-2012, 8:42 AM
Are you sure the metal is not coated with something that would prevent the Cermark from adhering?
Dan Hintz
02-10-2012, 9:00 AM
I'll ask the question no one else has... what settings are you using? (and add the power of your laser to your sig)
Mark Sipes
02-10-2012, 1:00 PM
Now I am really confused.... Does Ferro make colors for metal or not. I thought Cermark (black) was it for metal....... I don't see a color "pearl
white" listed as a metal marking compound.... please point me in the right direction.
Dan Hintz
02-10-2012, 1:09 PM
Black, pearl white, and bronze are metal colors...
Mark Sipes
02-10-2012, 1:25 PM
Dan can you send a link to the product colors..... this is the best/only selection chart I have found:
Complete Product List
If you know which product you are looking for, please use the links below for easy access to that product. If you need help determining which product to use, please visit our Marking Solutions (http://www.sawmillcreek.org/content/view/14/78/) section for more assistance.
Black on Metal
LMM14 (http://www.sawmillcreek.org/content/view/35/78/) - General purpose, aerosol & liquid ink
LMM6000 (http://www.sawmillcreek.org/content/view/36/78/) - General purpose, aerosol & paste ink
LMM6018.LF (http://www.sawmillcreek.org/content/view/38/78/) - General purpose & anodized, self-adhesive paper-backed tape
LMM6038 (http://www.sawmillcreek.org/content/view/39/78/) - Alternative for high shine metal, paste ink
LMM6046 (http://www.sawmillcreek.org/content/view/40/78/) - Alternative for aluminum & anodized, paste ink
Black on Glass
LMC6044P (http://www.sawmillcreek.org/content/view/42/80/) - Liquid ink (new, replaces LMC12 for glass/ceramic)
LMC260 (http://www.sawmillcreek.org/content/view/91/80/) - High speed non-adhesive tape
Black on Plastic
LMC12 (http://www.sawmillcreek.org/content/view/41/80/) - Liquid ink
LMP500 (http://www.sawmillcreek.org/content/view/92/80/) - Pad print ink
One Color on Glass/Ceramic (all liquid ink)
LMC94 (http://www.sawmillcreek.org/content/view/83/83/) - Imitation Etch White
LMC98 (http://www.sawmillcreek.org/content/view/84/83/) - Bright White
LMC6001P (http://www.sawmillcreek.org/content/view/78/83/) - Bronze (new, replaces LMC28)
LMC6013P (http://www.sawmillcreek.org/content/view/80/83/) - Blue (new, replaces LMC48)
LMC6062P (http://www.sawmillcreek.org/content/view/81/83/) - Green (new, replaces LMC62
Thanks....
Dan Hintz
02-10-2012, 2:16 PM
Hmmm, I may have to recant my last statement... I could have sworn the pearl white and bronze were metal, but a search turns up only results for glass :(
Roger McCurry
02-10-2012, 2:30 PM
Check out Laser Bits. They have the metal marking solution.
Gary Hair
02-10-2012, 2:50 PM
Hmmm, I may have to recant my last statement... I could have sworn the pearl white and bronze were metal, but a search turns up only results for glass :(
You were correct Dan, I have Pearl White and Copper for metal. They are samples I got from Ferro a while back. Both work really well, just like black.
Gary
Mike Null
02-10-2012, 5:02 PM
I'm not sure they are on the market. I have the samples too but it seems that Ferro was in a testing mode when they sent them out.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.