Joe Kieve
02-09-2012, 8:05 PM
Guys,
I searched this forum and found most of what I need to replace the bearings in my 36-810 right tilt Uni. I've got the belts, bearing cap, bearing nut, and arbor pulley set screws out. The instructions say to remove the arbor bracket. I'd rather not do this if I don't have to. Can I use a block of wood and tap out the arbor? Won't everything except the arbor end bearing come out?
Also, are the bearings standard 6203?
Looking forward to your expertise and thanks in advance for your help.
Joe
I searched this forum and found most of what I need to replace the bearings in my 36-810 right tilt Uni. I've got the belts, bearing cap, bearing nut, and arbor pulley set screws out. The instructions say to remove the arbor bracket. I'd rather not do this if I don't have to. Can I use a block of wood and tap out the arbor? Won't everything except the arbor end bearing come out?
Also, are the bearings standard 6203?
Looking forward to your expertise and thanks in advance for your help.
Joe