Mike Kelly
02-09-2012, 2:20 PM
I just did some maintenance on my M12V that has been in my router table for years. I had removed the springs a long time ago and was having trouble moving it close to the bottom of it's travel. Removed the base which wasn't stuck, but required a lot of effort to remove. While I was removing it a lot of sawdust was also coming out, but I noticed a lot of plastic material was also in it. Attached is a picture of the plastic stuff. I don't think it came from anything I have cut and is possibly coming from the armature or......??223241
Has anyone else experienced this? The reason I ask is that I had a cheap Sears router many years ago that started loosing armature stuff. I chalked that up to buying cheap tools and have tried not to purchase such since then. The M12V was purchased about 1988.
Has anyone else experienced this? The reason I ask is that I had a cheap Sears router many years ago that started loosing armature stuff. I chalked that up to buying cheap tools and have tried not to purchase such since then. The M12V was purchased about 1988.