Where can I download RDCAM/LaserWorks or the CorelDraw_Laser plugin for SH-G350?

[Mahabi Srinivasa]

I have a client that needed some assistance installing and setting up a new pc for the SH-G350 engraver from Shenhui. He purchased Corel Draw, but he is unable to find the compact disc that came with the laser. I tried going to the manufacturers website, en.shenhuilaser.com/download.asp , but I am unable to find the Laswerworks/RDCAM software. I also went to this website, rd-acs.com/en/download.asp , and cant find the engraving software either. If possible, could someone please assist me in locating the software. Thank you and I appreciate any advice.

Mahabi Srinivasa

[George M. Perzel]

Hi
I have the disc-do you have Skype? Easier to send that way.
George
Laserworks

[Mahabi Srinivasa]

Thank you George, my skype username is mahabiharta.srinivasa also my email is mahabisrinivasa@gmail.com , I appreciate your help.

[Rich Harman]

Mahabi, is your main board in a plastic enclosure?

[Rich Harman]

If your main board is not in a plastic enclosure you will need this: http://bit.ly/z7hdip

[Mahabi Srinivasa]

yes the mainboard IS in a white plastic enclosure

[Mahabi Srinivasa]

Thank you Rich,

I tried the older software and got no where, Laserwork is having communication failures with the v 3.04. If you happen to have the software for the sh-g350 with the white mainboard please let me know.

[Rich Harman]

This should work for the new main boards: http://bit.ly/xIUlUl

[Mahabi Srinivasa]

Thank you Rich, i am heading down to his shop now to test it out, I will let you know how it goes!

[Joe Thorn 911]

George,
You seem to know what's going on. I just got a 3060H with LaserWorks5.0. The software won't work unless the machine is turned on ("Note: Pleae Link Machine"). Do you know how to get around this issue so I don't have to have the machine "on" while just working with the software?
Thanks in advance,
Joe
Pueblo, Co.

[George M. Perzel]

Joe;
PM Rodne-he told me once how to do it but I don't remember .
Best Regards,
George
Laserarts

[George M. Perzel]

Joe;
Looked in my archives and found the following from roidne:
[6/16/2011 5:19:57 PM] *** Rodney Gold sent LaserWorkV5.exe ***
[6/16/2011 5:20:11 PM] Rodney Gold: put the file im sending somewhere
[6/16/2011 5:20:33 PM] Rodney Gold: install the NON demo version
[6/16/2011 5:20:59 PM] Rodney Gold: and then copy the file into the laserworks ver 5 directory on c>
[6/16/2011 5:21:04 PM] Rodney Gold: c:
[6/16/2011 5:21:17 PM] Rodney Gold: then run rdcam
[6/16/2011 5:21:33 PM] Rodney Gold: and clicl cancel when it wants you to link the machine
[6/16/2011 5:21:47 PM] Rodney Gold: and hey presto , everything work , inc;luding preview
[6/16/2011 5:22:44 PM] Rodney Gold: delete all the preview_xxx,ini files in the laerworks directroe except the previe_enf.ini file
[6/16/2011 5:22:56 PM] Rodney Gold: otherwise the preview comes up in chinese
[6/16/2011 5:23:42 PM] Rodney Gold: so do a normal install
[6/16/2011 5:23:55 PM] Rodney Gold: copy and replace the exe file
[6/16/2011 5:23:57 PM] Rodney Gold: run
[6/16/2011 5:24:03 PM] Rodney Gold: click cancel
[6/16/2011 5:24:17 PM] Rodney Gold: before running delete the preview files tho
[6/16/2011 5:24:27 PM] Rodney Gold: the .ini ones
[6/16/2011 5:24:36 PM] Rodney Gold: except the english one

Hope it helps
Best Regards,
George
Laserarts

[Rick A Thompson]

Guys, could you help me out too? Having just bought a used G350 (plastic controller box), with no software, I too was hoping I could get a copy of RDCam. I thought I could find a copy online, but thats proving to be next to impossible. Also, where is the official server?

[George M. Perzel]

Rick;
PM me with your email address and I will send.
Best Regards,
George
Laserarts

[jack stone]

hi george,
i was new in this forum, can you share to me the software Rdcam, thanks. my Email add (jackstone68@yahoo.com)

[Craig Dawes]

G'day everyone you can download the latest version direct from the motherboard manufacturer - http://en.rd-acs.com/. The company name is RuiDa.

Almost forgot the latest version is RDCAM setup 6.0.41