PDA

View Full Version : Resaw fence ideas


Victor Robinson
02-02-2012, 5:46 PM
I'd like to make a taller resaw fence for my Grizzly G0555. I was originally going to just take a straight piece of MDF and drill two large holes (with smaller perpendicular holes in them) to use with Rockler fence clamps. But I thought I'd ask if there are better options, additional features, or cleverer designs out there. I don't have any drift to compensate for, so I'm basically looking to attach to the stock aluminum fence.

Whatcha use?
John Lanciani
02-02-2012, 8:14 PM
Being lazy, see post #11 here; http://www.sawmillcreek.org/showthread.php?178546-Veneering-Resawing-questions
Steve Rosenlund
02-03-2012, 8:42 AM
Would this work?

http://www.grizzly.com/products/Resaw-Fence-Attachment-for-14-Bandsaws/H7584
Alan Lightstone
02-03-2012, 12:05 PM
John's fence above is off the charts amazing. On my to-do list, some day.
Victor Robinson
02-03-2012, 12:16 PM
John, that is a really cool setup. I will have to bookmark that!

Steve - it certainly would, I was just hoping to not spend much money on it. :)
Jim Rimmer
02-03-2012, 12:59 PM
Would this work?

http://www.grizzly.com/products/Resaw-Fence-Attachment-for-14-Bandsaws/H7584

That's what I use with my G0555X and it works great.

I've got a set of those Rockler fence clamps and am not impressed.
Victor Robinson
02-03-2012, 1:07 PM
That's what I use with my G0555X and it works great.

I've got a set of those Rockler fence clamps and am not impressed.

Jim, please elaborate on the fence clamps. :) I have a pair but haven't used them yet.