Gary Herrmann
03-18-2005, 9:59 AM
My EZ arrived yesterday. I ordered the plastic storage case so I wouldn't have to find or build a box to store it in. Seems very well constructed. I drilled the holes in my saw base last night and mounted it on the guide. One Tnut is a little crooked - I must have angled the drill a bit. I'll probably leave that one a bit loose, rather than having the Tnut stick out of the little depression in the base. The other 3 are very snug. By the time I was done if was almost 9pm - 4 yr old was asleep. Can't run the saw...
Hopefully I'll get the guide set up tonight. Tomorrow I had already planned on picking up some Mahogany ply for a bookcase I'm building, so I'll get to test it.
Cool minor side note - the EZ saw guide fits on my Milwaukee saw well enough that I can leave it on the saw when I put it back in the saw case.
Hopefully I'll get the guide set up tonight. Tomorrow I had already planned on picking up some Mahogany ply for a bookcase I'm building, so I'll get to test it.
Cool minor side note - the EZ saw guide fits on my Milwaukee saw well enough that I can leave it on the saw when I put it back in the saw case.