PDA

View Full Version : Grizzley Sander



Curt Stivison
01-28-2012, 7:56 PM
Does ayone have a 16" Grizzley sander? If so, would you buy one again?

Nelson Howe
01-28-2012, 8:01 PM
I don't have one, but do you know your thread says "Grizzley Sander?" You might get better information with a better title. I'm not sure if you can edit that?

Nelson

Rick Alexander
01-28-2012, 8:32 PM
which is the 24 inch. Works just fine once you make the change to hook and loop paper. Before that I was ready to toss the thing in the trash. Dust collection pretty much sucks - only gets the finest cloud of dust and that's with a 3 HP 2 stage cyclone with a 6 inch to 2 4 inch lines to it. I just stand behind it with a shop vac sucking the dust off the doors as they come out.

The thing is the cats meow for flat RP doors. If you can possibly afford the space - get the 24 inch. You really can't sand a full 16 inches with the 16 inch sander because you get too close to the sand paper ends it tends to give problems. The 24 gives you plenty of room for most any RP door.

I love the thing. Sure - I'd love to have a 38 inch wide belt sander but this does pretty good for me.

Van Huskey
01-28-2012, 10:32 PM
Just FYI you can edit the title, within 24 hours like all posts, by going advanced after you hit edit.

Bob Landel
01-28-2012, 10:53 PM
Van Huskey, you have probably answered this more than a few times, what the heck is 5,301 to 5,328 miles from your coincidence? Also Nelson what is wrong withe title of Grizzley Sander?

Richard Wolf
01-28-2012, 11:25 PM
It's Grizzly, not Grizzley.

Bob Landel
01-29-2012, 2:34 AM
Obviously Wolfey, but who cares how it was spelled! All of us knew what was meant. Nelson's remark were as poor as mine is here.

Josiah Bartlett
01-29-2012, 3:14 AM
Incorrect spelling makes it nearly impossible for others to find the information in your thread through the search function.

Nelson Howe
01-29-2012, 7:30 AM
Sorry. I must be blind. I could have sworn your original post asked about a planer. I dont correct spelling.
Nelson

Curt Stivison
01-29-2012, 9:49 AM
Thanxs for the information

Bob Landel
01-29-2012, 1:14 PM
Incorrect spelling makes it nearly impossible for others to find the information in your thread through the search function.

Josiah, very good point. I knew I should keep my mouth shut! Sorry Nelson.

Bob Landel
01-29-2012, 1:17 PM
Incorrect spelling makes it nearly impossible for others to find the information in your thread through the search function.

Josiah, good point. I need to keep my mouth closed!