SGT Christopher Burgin
01-18-2012, 8:28 PM
Hello, my name is Christopher T. Burgin, and this is my first time ever posting anything on the internet. Please forgive me if I screw something up.
I have here a Miller Falls 120B hand drill and wish to change the speed.
In Pic 1 (Green Arrow) there is a washer welded on the spindle for the crank. I am wondring if this is original or if some one before me had did this to make the drill permanently slow speed. I was thinking of grinding it off if it is not origianl equipment.
I did see the pin assembly (Blue and White arrows) and tried pounding it out, but thought I better ask before I screw it up.
If someone knows about this I would sure appreciate the advice.
Thank you very much.
Pic 1 Pic 2 Pic 3 Pic 4
220313220312220311220310
I have here a Miller Falls 120B hand drill and wish to change the speed.
In Pic 1 (Green Arrow) there is a washer welded on the spindle for the crank. I am wondring if this is original or if some one before me had did this to make the drill permanently slow speed. I was thinking of grinding it off if it is not origianl equipment.
I did see the pin assembly (Blue and White arrows) and tried pounding it out, but thought I better ask before I screw it up.
If someone knows about this I would sure appreciate the advice.
Thank you very much.
Pic 1 Pic 2 Pic 3 Pic 4
220313220312220311220310