PDA

View Full Version : Roland EGX350 - 3D Engrave



Rony Nemi
01-18-2012, 12:16 PM
Hi everybody,

I am a begginer using the Roland EGX350 engraver, so I find several doubts day by day. At this moment I have some doubts regarding 3D milling procedures using the 3D Engrave software. Is there any good soul that could help me? ;)
My main concern is that I canīt find any procedure to mill some parts with a tool and after that do a pass with a smaller one to do the parts that the big tool couldnīt mill. I would like to know is there is any way to avoid the repetition of all the process with the small tool milling "the air" in most of the parts.
I will really appreciate your comments.
Thanks!

Rony