Eric Gourieux
01-16-2012, 12:13 AM
I thought I'd share my gouge sharpening jig for sharpening on my Tormek. I adapted a jig I found on Eddie Castelin's website for my use. On the bottom, I have a block that I place between the horizontal bar and the sharpening stone to set the distance for my particular gouge. As the stone is worn down, I can keep the distance the same to assure a repeatable grind. The top portion if the jig is cut to the length that I need to mount the gouge in the holder. I have a jig for both my 3/8 and 5/8 gouges.
Thanks to David Keller's suggestion, I was able to adjust the size of the picture file in order to upload. Thanks, David.
219920219919
Thanks to David Keller's suggestion, I was able to adjust the size of the picture file in order to upload. Thanks, David.
219920219919