Rob Littleton
03-14-2005, 8:07 PM
When using sandpaper pads like I do alot, I sand my turnings and turn over the pad and add wax or finish with the backside of the pad. Obviously not for multiple uses but pretty handy.
Also, spare light strips for my stirp lights, I use pipe insulation (the long black lenghts) to keep the bulbs in. If they fall or are lightly bumped, they stand a chance of survival.
Just a couple of thoughts
Also, spare light strips for my stirp lights, I use pipe insulation (the long black lenghts) to keep the bulbs in. If they fall or are lightly bumped, they stand a chance of survival.
Just a couple of thoughts