Rob Price
01-10-2012, 2:54 PM
Still waiting on my NOVA 100m jaws to start my pepper mills (and trying to get some experience).
I took the calipers to my crush grind mechanic from CSU, and the little tenon on the top is 1 1/64". The instructions say to drill that hole with a 1 1/16" bit (which I had to buy). Just eyeballing it with the calipers set to 1 1/16" seems like the tenon would be pretty loose (i.e. not touching at all). Does this lead to some slop in the top when you're twisting it or is the metal rod stiff enough to keep the top on straight?
I took the calipers to my crush grind mechanic from CSU, and the little tenon on the top is 1 1/64". The instructions say to drill that hole with a 1 1/16" bit (which I had to buy). Just eyeballing it with the calipers set to 1 1/16" seems like the tenon would be pretty loose (i.e. not touching at all). Does this lead to some slop in the top when you're twisting it or is the metal rod stiff enough to keep the top on straight?