Peter Blair
01-08-2012, 2:12 PM
Greetings everyone. Here are a few pieces that I have just added to my inventory.
You may notice that I have several 'dust' specks on these photos. Last time this occurred I was able to blow them away with a bulb type blower but not this time. I guess I'll have to have the camera professionally cleaned.
218992
Here is my first foray into the world of color. The piece is titles "Pacific Sunset". It is spalted maple and is about 10 1/2 in x 3/4". Finished with WOP.
218993
Here is small hollow form of Spalted Maple with a walnut rim. It is 4" x 3 1/2" wide with a wall thickness of about 3/16"
218994
This one is my first attempt at a large (for me) hollow form. Done from wet Cherry it is 10" high and 5" wide. Wall thickness is 1/4 with a slightly thicker bottom. Again finished with beeswax and mineral oil.
218995218996
Another spalted maple bowl. This is about 7" x 2 3/4" finished with beeswax and mineral oil. I have many, many once turned blanks that I rougher out over a year ago and am now trying to finish some of them. This one was a core from a much larger piece.
Thanks for looking and all comments pro and con are most welcome.
You may notice that I have several 'dust' specks on these photos. Last time this occurred I was able to blow them away with a bulb type blower but not this time. I guess I'll have to have the camera professionally cleaned.
218992
Here is my first foray into the world of color. The piece is titles "Pacific Sunset". It is spalted maple and is about 10 1/2 in x 3/4". Finished with WOP.
218993
Here is small hollow form of Spalted Maple with a walnut rim. It is 4" x 3 1/2" wide with a wall thickness of about 3/16"
218994
This one is my first attempt at a large (for me) hollow form. Done from wet Cherry it is 10" high and 5" wide. Wall thickness is 1/4 with a slightly thicker bottom. Again finished with beeswax and mineral oil.
218995218996
Another spalted maple bowl. This is about 7" x 2 3/4" finished with beeswax and mineral oil. I have many, many once turned blanks that I rougher out over a year ago and am now trying to finish some of them. This one was a core from a much larger piece.
Thanks for looking and all comments pro and con are most welcome.