Joseph Tovar
12-31-2011, 6:26 AM
Hi Guys,
I've noticed in the last few months that I have different cutting results in different areas of my laser bed. For example, when I cut some wood, everything about 3" from the left side cuts all the way through, but anything within the 3" doesn't cut all the way through? What would cause this? Shouldn't the power be equal all around the bed?
Thanks,
Joseph
I've noticed in the last few months that I have different cutting results in different areas of my laser bed. For example, when I cut some wood, everything about 3" from the left side cuts all the way through, but anything within the 3" doesn't cut all the way through? What would cause this? Shouldn't the power be equal all around the bed?
Thanks,
Joseph