View Full Version : The Jet is working
Ken Hill
12-23-2011, 7:57 AM
The new Jet 1642 EVS is well on its way. A few quirks I am getting used to but things are starting to flow. Changing to the lower speed belt helped a ton, its so nice being able to go out, cut a few blanks and turn them without having to clip corners to fit the lathe.
216984
James Combs
12-23-2011, 8:06 AM
Wow Ken, looks to me like you've gone into production. I have the same lathe and agree it is a joy to use.
John Keeton
12-23-2011, 8:07 AM
Ken, you are becoming a bowl making machine!! Glad the Jet is performing well for you - I have enjoyed mine, as well.
Ken Hill
12-23-2011, 8:24 AM
There is a few more that are on a bench being sealed that arent pictured. I usually try and get one or two turned before first light. My "season" starts mid february so I got to play now before I hit the road.
Steve Schlumpf
12-23-2011, 8:30 AM
its so nice being able to go out, cut a few blanks and turn them without having to clip corners to fit the lathe.
One of the things I appreciate most about my Robust!! Looks like you have been very busy! Seeing as how you are in production mode... make sure to throw in a little variety to your blanks. Nothing worse than coming back to your stash 10 months later only to find that you are stuck turning a certain form. Just my experience...
Ken Hill
12-23-2011, 8:33 AM
No worries Steve, I have alot of requests for heavy mixing bowl styled items so thats why there is quite a few of that shape. I cut a really nice red oak crotch this morning that is alot different and will be making more of that style for a few days then on to something else LOL!
Russell Eaton
12-23-2011, 8:48 AM
I turned my first pen before 6:00 am. Looks like you got up a little earlier.
Jim Burr
12-23-2011, 8:50 AM
I got the shop vacuumed by 7 am!
Richard Jones
12-23-2011, 9:43 AM
I got the shop vacuumed by 7 am!
That's just wrong.............
Bernie Weishapl
12-23-2011, 9:49 AM
Ken you are a machine. Can't say as I would have anything turned before first light or the shop vacuumed before 7 am.
Ken Hill
12-23-2011, 11:58 AM
Vaccum'd? Geez, I like turning because you are supposed to have shavings and junk around LOL! I am up at 4:30 and by 5 I am into something....isnt always turning but you can bet im getting started on something.
Thomas Canfield
12-23-2011, 10:34 PM
Ken,
I see recesses in the bottom for use with chuck. What is your method for remounting and truing up a oval dried bowl for finishing?
Ken Hill
12-23-2011, 10:40 PM
I use my vaccum chuck to hold the bowl, then true the recess, then remount in the chuck.
Ken Hill
12-23-2011, 10:49 PM
Thomas, let me add that last season I did all tenon's, pretty easy to true up, but after having several with the recess offer less warping (read from Mr Reeds postings here ) I decided to just switch to the recess all together. There is a center mark inside and out if needed but usually my self centering set up gets me on the mark. There is always some clean up work to re-true the blank but here thats a given. I am anchorsealing the entire blank this year though, which should help with even less movement. The majority of the wood I am turning was winter cut and been down for a year, still green but not slinging water. I have finished turned several pieces that only needed the foot cleaned up after 2 weeks of drying so that the bowl sits level. Turning mostly Oak and Hickory, I have to tend to cracks even when turning so I am not sure how well i can follow Mr Reeds advice on turning to final thickness as much as I would like, but I am working on it haha
Ken Hill
12-23-2011, 11:20 PM
Mar 24 - Mar 25
Pell City, AL (http://www.atvmotocross.com/pages/schedule/fmf-spring-nationals)
Apr 21 - Apr 22
Blountville, TN (http://www.atvmotocross.com/pages/schedule/toyota-of-kingsport-atv-southern-nationals)
May 5 - May 6
Budds Creek, MD (http://www.atvmotocross.com/pages/schedule/budds-creek)
May 19 - May 20
Walnut, IL (http://www.atvmotocross.com/pages/schedule/sunset-ridge-national)
Jun 2 - Jun 3
Oakland, KY (http://www.atvmotocross.com/pages/schedule/bluegrass-nationals)
Jun 16 - Jun 17
Mt. Morris, PA
Jun 30 - Jul 1
Millfield, OH (http://www.atvmotocross.com/pages/schedule/suzuki-sunday-creek-)
Jul 14 - Jul 15
New Berlin, NY (http://www.atvmotocross.com/pages/schedule/unadilla)
Jul 28 - Jul 29
Buchanan, MI (http://www.atvmotocross.com/pages/schedule/red-bud)
Aug 11 - Aug 12
HUrricane Mills, TN (http://www.atvmotocross.com/pages/schedule/atv-dirt-days)
Rd. 1
March 10-13
WestgateRiver Ranch
River Ranch, FL
Rd. 2
March 17-18
The General
Aonia Pass, GA
Rd. 3
Mar 31-Apr 1
Steele Creek
Morganton, NC
Rd. 4
April 14-15
Big Buck
Union, SC
Rd. 5
April 28-29
The Mammoth
Park City, KY
Rd. 6
May 12-13
Indy 100
Springville, IN
Rd. 7
May 26-27
Buckwheat
Masontown, WV
Rd. 8
June 23-24
Snowshoe
Snowshoe, WV
Rd. 9
July 7-8
John Penton
Millfield, OH
Rd. 10
Sep 15-16
Unadilla
New Berlin, NY
Rd. 11
Oct 6-7
PowerlinePark
St. Clairsville, OH
Rd. 12
Oct 20-21
Ironman
Crawfordsville, IN
Rd. 13
Nov 3-4
Loretta Lynn's
Hurricane Mills, TN
Finally got 2 of the 3 series schedules tonight.....as you can see, once I hit the road, there is PLENTY of time for drying! I think I may have 3 weekends off LOL. Looks like I will be in Kentucky....might have to pay Mr Keeton a visit and do some front porch sittin!
John Keeton
12-24-2011, 7:50 AM
Ken, Oakland is about 3 hours west of us, but I would love to have you visit if you can manage it! Let me know if you think it will come together.
Ken Hill
12-24-2011, 8:49 AM
It's all good John. I am supposed to be getting a few models of ATV and RUV's in here to take with me each weekend so that I can visit riding areas and write/photograph the models and areas for articles. Thats a huge bonus for me as it adds to the paycheck without costing me extra running. So hopefully I can take a bit of time and visit with folks around teh east coast and maybe do some wood swapping while we are at it!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.