Michael Simpson Virgina
12-23-2011, 1:17 AM
I finished the table for the most part.
Simply loosen the knobs under the table and slide it out.
http://www.youtube.com/watch?v=MOv88lMDWAA
I found out that I can use two festool quick release clamps to hold the stock firmly inplace.
Simply loosen the knobs under the table and slide it out.
http://www.youtube.com/watch?v=MOv88lMDWAA
I found out that I can use two festool quick release clamps to hold the stock firmly inplace.