broken conveyor belt on jet 16/32 sander.

[keith ouellette]

Does anyone know if all the belts are pretty much the same over the years?

My machine is probably 6 years old. I found a new belt on ebay and it looks different. I'm not worried about the width because 16" should still be 16" but the length of the tables may have changed making the belt longer.

[Robert Chapman]

I've never heard of the length of the table changing on a 16/32 sander. You could check with Jet.

[Neil Brooks]

I can't speak to the size, directly, but am very happy with my replacement belt from Accura Machinery.

LINK (http://www.accuramachinetools.com/replacement-conveyor-belt-for-accuraryobiperformax-etc-1632-sa.html)

[keith ouellette]

To any interested. I just ordered one off an ebay listing for $57 including shipping. they had 10 when I ordered.

[Steve Aasen]

I replaced the original belt with one I found (on Ebay, if I remember correctly). It was a task to get it properly installed but I am very happy with it. It's a white plastic material.
Steve

[keith ouellette]

I replaced the original belt with one I found (on Ebay, if I remember correctly). It was a task to get it properly installed but I am very happy with it. It's a white plastic material.
Steve


I think thats the same kind I just purchased.

[Phil Thien]

I think thats the same kind I just purchased.

I wonder if the belt for a Jet would fit a Ryobi. Anyone know the width of the jet belt? Is there a way to accurately measure the length without cutting one open?

[Kyle Iwamoto]

To measure the length, tape the end of a string on the belt, turn on the conveyor, and when the end of the strings touch, mark the string, pull it off and measure it.