View Full Version : rubber feet
charlie spencer
12-16-2011, 11:38 AM
anybody know of a source for rubber feet I can attach to a cutting board with a screw?
Steve Friedman
12-16-2011, 12:23 PM
Lee Valley
charlie spencer
12-16-2011, 12:40 PM
perfect-thanks
Dave Aronson
12-16-2011, 12:50 PM
I get white rubber feet at Home Depot. They only carry one style, they are white and about quarter size. $2 for four of them.
Jim Tobias
12-16-2011, 2:09 PM
Charlie,
I bought some from someone on this site awhile back, but cannot remember the name. They had bought in bulk and were reselling. You might be able to do a search and find out who it was.
keith micinski
12-17-2011, 11:43 AM
HOme depot has the best selection of cheap rubber feet of all the big stores. I actually didn't like the white ones because they were to tall and they stuck out like a sore thumb.
Kevin Gregoire
12-17-2011, 1:31 PM
why not make your own rubber feet?
i make wooden canes and i use an old mouse pad and cut it up
and epoxy the piece onto the bottom of the cane and the rubber
part that contacts the ground has a great non slip finish.
you can cut out a very short block of wood or turn a piece if you
have a lathe, epoxy the pad to it and drill your hole so you can screw it down,
should work great!
Dan Hahr
12-18-2011, 12:08 AM
Home Depot or Lowes has some nice black, thin hard rubber feet with a metal washer embedded in them. Very professional and functional. Dan
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.