16-32 casters

[denis tuomey]

16-32 Jet DS should be here this week :), any 16-32 owners happen to know what the stem size is for the casters ?

[david brum]

Pretty sure the holes in the legs are for 3/8" stems.

[Tony Zaffuto]

I got my 16-32 brand new, with in & out feed tables and casters. If I remember correctly, it was all less than $600 and was before the Jet name appeared on the sanders (still Performax but built in Taiwan). Has been an excellent performer with the only repair being the reset switch on the motor.

[lawrence dosson]

Denis
i just looked at mine 1/2 inch probably 12 mm i belive the casters are grizzlys pretty sure i would not have enlarged the holes but it has been a whille sence i put the 16/32 on casters mine is the jet version great machine BTY

[Victor Robinson]

I used four of these on my 16-32's stand:
http://www.amazon.com/Steelex-D2614-220-Pound-Threaded-Polyurethane/dp/B0000DD1EK/ref=pd_cp_hi_0

[Thomas Hotchkin]

Denis
The stem on my 16-32 are 3/8". Pickup casters at HD, locking on all four corners. Tom

[denis tuomey]

Thanks guys for your help. I picked up the 16-32 yesterday and found out the holes are 1/2 in., had a set of locking casters w/ 1/2 in. stem that I got from Rockler at a special $ so was able to use them. Got it mounted to the stand and conveyor bed on, still need to mount the in-out tables, can't wait to crank er up.