steve brownell
12-06-2011, 1:34 PM
Hi,
Do and Creekers have feedback or experience regarding the 12 tooth sprocket and chain that's used to convert the Powermatic 209 to low speed feed?
I work almost exclusively with sapele and hard maple and was wondering if the lower speed conversion is worth doing. This is a standard knife machine; have not installed a shelix head yet.
Thanks in advance for any insight here.
Do and Creekers have feedback or experience regarding the 12 tooth sprocket and chain that's used to convert the Powermatic 209 to low speed feed?
I work almost exclusively with sapele and hard maple and was wondering if the lower speed conversion is worth doing. This is a standard knife machine; have not installed a shelix head yet.
Thanks in advance for any insight here.