View Full Version : Copper sheets
Martin Boekers
12-05-2011, 12:07 PM
Is any one aware of a vendor that sell painted copper sheets, instead of brass?
If not a supplier of thin copper sheets i can paint.
Thanks!
Mike Null
12-05-2011, 1:07 PM
Marty
You can get a very nice copper finished aluminum from JDS.
Chuck Stone
12-05-2011, 2:00 PM
You can usually get copper sheets at an art supply store, but they're not cheap.
I think I got rolls of 12" and I think it was around $40/yd. Also got some rolls of
'coppertone' aluminum sheeting, that was about $20 for a 25' roll. But that was
tooling foil (embossing) and only 0.004" thick.
Ross Moshinsky
12-05-2011, 2:40 PM
Main trophy supply is another place to get copper sheet. I can't recall if it's 100% copper or copper plated.
Neal Schlee
12-05-2011, 3:11 PM
http://www.mcmaster.com/#red-metals/=f8fldg
Neal
Martin Boekers
12-05-2011, 3:18 PM
Thanks all, I am doing a project for a family whose heritage was copper mining, they would like copper plates, but I am leaning toward Copper Lazer Blak.
We'll see!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.