Copper sheets

[Martin Boekers]

Is any one aware of a vendor that sell painted copper sheets, instead of brass?

If not a supplier of thin copper sheets i can paint.

Thanks!

[Mike Null]

Marty

You can get a very nice copper finished aluminum from JDS.

[Chuck Stone]

You can usually get copper sheets at an art supply store, but they're not cheap.
I think I got rolls of 12" and I think it was around $40/yd. Also got some rolls of
'coppertone' aluminum sheeting, that was about $20 for a 25' roll. But that was
tooling foil (embossing) and only 0.004" thick.

[Ross Moshinsky]

Main trophy supply is another place to get copper sheet. I can't recall if it's 100% copper or copper plated.

[Neal Schlee]

http://www.mcmaster.com/#red-metals/=f8fldg

Neal

[Martin Boekers]

Thanks all, I am doing a project for a family whose heritage was copper mining, they would like copper plates, but I am leaning toward Copper Lazer Blak.

We'll see!